Not Just a Job

Work for Us

At Century Contractors, we help people build careers with the same strength and longevity as our projects. When you work with us, you gain more than employment. You gain lifelong friendships and an opportunity to turn your potential into a long-term career path. You gain excellent benefits with a company that treats you professionally and cares about you personally. A company that supports your goals and values your contribution each and every day.

Why Work With Us?

If you’re a self-starter looking for a long-term career with a company that values you and your skills, we’d like to hear from you. To be considered for employment, please submit the following completed form and a current resume. You must also pass pre-employment screenings before being hired. If you have any questions about employment at Century Contractors, please call 704.821.8050.

BENEFITS

At Century Contractors, we believe the best way to identify and keep outstanding employees is to offer great reasons to work with us. This starts with assuring safety, continuing education, and career development for every employee. In addition, we offer a fun and flexible work environment and benefits that back up our employee commitment.

  • Health Benefit Plan
  • Dental Benefit Plan

Voluntary Benefit Offerings:

  • Vision Benefit Plan
  • Supplemental Life
  • Group Long Term Disability
  • Flexible Spending Account – Medical & Dependent Care
  • Group Cancer, Critical Illness, & Hospital Indemnity

Current Opportunities

Join Our Team

Century Contractors constantly adds projects and clients to its portfolio, so we’re always looking for professionals and trades specialists who share our dedication to high-quality craftsmanship and project safety. Feel free to search our current openings for one that meets your career goals and qualifications.

Industrial Piping Estimator

Summary of Position

Job Description:

The Industrial Piping Estimator will be responsible for accurate quantity surveys preparation of subcontractor and vendor work scopes, quote analysis and estimating the cost of self perform work.  The Estimator must be able to meet critical deadlines and have the ability to work as part of a team.

 

 

Duties and Responsibilities

Duties include, but are not limited to:

-Reviewing and evaluating  RFQ’s, RFPs and Bid Documents

-Developing RFIs for inconsistencies and missing information in the contract documents

-Aid in developing full-scope cost estimates based on proposal documentation on a variety of negotiated bids, hard bids, design-build and GMP projects for various public and private clients

-Responsible for accurate, detailed quantity take-offs from project execution schedule

-Assist in developing the initial project plan and project

-Responsible for the preparation timely completion and documentation of project estimate assuring completeness and accuracy

-Solicit subcontractor and vendor quotations, analyze, compare price materials

-Executing Quickpen take off of construction documents

-Perform research for means and methods, materials , costs and construction techniques and services material and labor

-Update maintain resource information on products and vendors

-Show creativity and resourcefulness to gain better pricing from subcontractors

-Submit 100% of bids and budgets by the bid deadlines

Qualifications

8-10 years of related experience and or training or equivalent combination of education and expertise

Must be able to read and interpret documents such as bid front ends, scopes of work blueprints, safety programs, QA/QC Manuals

Knowledge of Quickpen software or similar estimating systems strongly preferred

Experience with estimating techniques and cost control

Experience with performing detailed labor and material take-offs

Must be self motivated excellence driven and work well in a team environment.

Please apply via email with resume to jobs@centurycontractors.com

Plumber/Plumber Foreman (Non-Exempt)

Summary of Position

Century Contractors is currently seeking experienced Plumber and a Plumber Foreman

Plumbers will be responsible for the under slab installation of drain lines and water lines and new build all the way out to completion

Pay is based on experience  per diem  if eligible. Must pass pre-employment screening

Call 704-821-2208 or click on apply today to be considered for this great opportunity!

Find us on LinkedIn
#centuryworks4you #workforcentury

Duties and Responsibilities

Duties:

Layout installation of underground plumbing (under slab) Rough in to stub out Must be able to read blueprints Pressure and leak test experience May be required to do layout and gluing braising or no hub etc. Must have tools of the trade Plumber foreman should have experience running at least a 4 man crew

Must be self motivated excellence driven and work well in a team environment.

Qualifications

Qualifications: Must have at least 5 years verifiable experience in underground Under slab plumbing and installation. Education: High School or GED Additional trade school preferred. Must demonstrate strong knowledge of industrial commercial mechanical construction manner of working Foreman need at least 2 years supervisory experience

Physical Demands

Must be physically capable of performing essential functions associated with job requirements, e.g. climbing ladders, heavy lifting 50 lbs.+, bending, stooping, standing for extended periods of time, twisting

PIPE FITTER (Non-Exempt)

Summary of Position

A qualified Pipe Fitter will lay out, assemble, install, or maintain pipe systems, pipe supports, or related hydraulic or pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, or industrial production or processing systems. The candidate may work in other crafts at levels appropriate to training and skills as requested by supervision.

Duties and Responsibilities

  • Layout, fabrication, assembly and installation of both, carbon, stainless steel, and other types of pipe and similar tubular products as related to industrial processing systems.
  • Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders.
  • Lay out full scale drawings of pipe systems, supports, or related equipment, according to blueprints.
  • Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods.
  • Attach pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment.
  • Detect faulty operation of equipment or defective materials and notify supervisors.
  • Follow established job-site safety and regulations and maintain a safe and clean work area.
  • Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.

Qualifications

  • Education (experience may be accepted in lieu of some educational requirements): High School Diploma (or GED or High School Equivalence Certificate) required. Additional trade school or industry certification, highly preferred.
  • Experience: At least 3 years’ pipe fitting experience preferred. Must pass the prescribed pipe fitter test.
  • Communication Skills: Comprehend documents such as safety rules, operating maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. The ability to understand information, ideas, direction and then be able to perform the task or project discussed. Also, to be able to ask questions to insure you understand the information given.
  • Communicate clearly verbally, in handwriting, and electronically.
  • Demonstrates strong knowledge of industrial/commercial mechanical construction manner of working.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Ability to perform repetitive movements
  • Ability to work overhead
  • Ability to use hands to grasp
  • Ability to reach with arms
  • Ability to stand, walk, stoop, kneel, squat, crawl, and twist
  • Ability to sit, climb and balance.
  • Ability to work up to 12 hour shift in all weather and temperature extremes.
  • Ability to frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds.
  • Vision adequate to perform all required tasks.
  • Ability to move in and around confined and cluttered places and uneven areas. Full range of motion and flexibility consistent with age.
  • Ability to work over 5 feet above the ground; must not have fear of heights

PIPE WELDER (Non-Exempt)

Summary of Position

A qualified Pipe Welder will plan, lay-out, weld, install, test and repair all types of pipe and similar tubular products in accordance with all applicable plans, specifications, codes, and industry standards. The candidate may also work in other crafts at levels appropriate to training and skills as requested by supervision.

Duties and Responsibilities

  • Weld components in flat, vertical, or overhead positions.
  • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
  • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
  • Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code.
  • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
  • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
  • Detect faulty operation of equipment or defective materials and notify supervisors.
  • Follow established job-site safety and regulations and maintain a safe and clean work area.
  • Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.

Qualifications

  • Education (experience may be accepted in lieu of some educational requirements): High School Diploma (or GED or High School Equivalence Certificate) required. Additional trade school certification highly preferred.
  • Experience: 3 years’ welding experience preferred. Must pass the prescribed weld test.
  • Communication Skills: Comprehend documents such as safety rules, operating maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. The ability to understand information, ideas, direction and then be able to perform the task or project discussed. Also, to be able to ask questions to insure you understand the information given.
  • Must have a working knowledge of various welding codes, specifications, techniques and methods.
  • Must be familiar with properties of metal machining, weld shrinkage and welding techniques

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Ability to perform repetitive movements
  • Ability to work overhead
  • Ability to use hands to grasp
  • Ability to reach with arms
  • Ability to stand, walk, stoop, kneel, squat, crawl, and twist
  • Ability to sit, climb and balance.
  • Ability to work up to 12 hour shift in all weather and temperature extremes.
  • Ability to frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds.
  • Vision adequate to perform all required tasks.
  • Ability to move in and around confined and cluttered places and uneven areas. Full range of motion and flexibility consistent with age.
  • Ability to work over 5 feet above the ground; must not have fear of heights

SHEETMETAL MECHANIC (Non-Exempt)

Summary of Position

A qualified Sheet Metal Mechanic will fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes. Work in other crafts at levels appropriate to training and skills as requested by supervision.

Duties and Responsibilities

  • Install assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts, furnace casings, and other air handling equipment.
  • Determine project requirements, such as scope, assembly sequences, or required methods or materials, using blueprints, drawings, or written or verbal instructions.
  • Trim, file, grind, deburr, buff, or smooth surfaces, seams, or joints of assembled parts, using hand tools or portable power tools.
  • Fasten seams or joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, or bonds to assemble components into products or to repair sheet metal items.
  • Verify that heating, ventilating, and air conditioning (HVAC) systems are designed, installed, and calibrated in accordance with green certification standards, such as those of Leadership in Energy and Environmental Design (LEED).
  • Detect faulty operation of equipment or defective materials and notify supervisors.
  • Follow established job-site safety and regulations and maintain a safe and clean work area.
  • Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.

Qualifications

  • Education (experience may be accepted in lieu of some educational requirements): High School Diploma (or GED or High School Equivalence Certificate) required. Additional trade school or industry certification, highly preferred.
  • Experience: At least 3 years’ experience in industrial construction performing mechanical installation preferred.
  • Communication Skills: Comprehend documents such as safety rules, operating maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. The ability to understand information, ideas, direction and then be able to perform the task or project discussed. Also, to be able to ask questions to insure you understand the information given.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Ability to perform repetitive movements
  • Ability to work overhead
  • Ability to use hands to grasp
  • Ability to reach with arms
  • Ability to stand, walk, stoop, kneel, squat, crawl, and twist
  • Ability to sit, climb and balance.
  • Ability to work up to 12 hour shift in all weather and temperature extremes.
  • Ability to frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds.
  • Vision adequate to perform all required tasks.
  • Ability to move in and around confined and cluttered places and uneven areas. Full range of motion and flexibility consistent with age.
  • Ability to work over 5 feet above the ground; must not have fear of heights.